beagle software

Quick Start


To get CallWatch up and running:

  1. Start the CallWatch program.

  2. Open the Dialing Tab from the Options menu.

  3. Enter the local Area Code and Home State you are calling from.

  4. Enter a new record in the contact database.

  5. Press the Home or Business phone button to start a call.

  6. Check that the Com port is correct for the modem you will use for dialing.

  7. Press the Dial button to select carrier.

  8. Choose a carrier from the list with the mouse.

  9. Call is dialed through the modem.

  10. Press Talk button to talk. Converse.

  11. Hang Up button pressed.

  12. Comments can be entered in call log.

  13. Call log is closed.





Software Installation

To install CallWatch:

  1. Remove the CD-ROM or floppies. If installing from floppies, write down the key code printed on the first floppy.

  1. Place the CD-ROM or first floppy in the drive.

  1. From the Windows Start menu in the lower left corner select the  Run command from the menu

  1. Enter x:\setup in the Open box where x is the drive letter used. Press OK

  1. Follow the instructions from the installation wizard. For a typical installation you can accept all defaults offered by the wizard.

  1. When asked for the key code, enter the key code you copied down (above) exactly as written in the Enter Code screen on the registration page, or if already in CallWatch choose the Register option under the Help menu.

  1. If requested, you may need to reboot the system to install the new DLLs that were just installed.

  1. When installation is complete, Start CallWatch from the
    Start/Programs/Beagle Software/CallWatch menu.

6