Using ClockWatch Behind Firewalls
Firewalls are common in networks to encapsulate the LAN users from the World Wide Web. A firewall is a server or application that servers as a intermediary between the LAN users and the Internet. Applications needing access to the Internet must talk to the firewall for access to the outside.

ClockWatch normally uses the Internet to connect to the timeservers of the National Institute of Standards and Technology (NIST) or other timeservers. Beginning with version 1.3 ClockWatch can be configured to work behind a proxy server.

There are several approaches that can be used to connect ClockWatch to the Internet through a firewall. In general these approaches involve configuring the application to work with the server. In some cases configuration of the server is also necessary.

Steps to configure ClockWatch behind a firewall.

1. Check if re-configuration is necessary behind the firewall:
Install ClockWatch and see if it works.

2. If ClockWatch can't communicate directly over the Internet, find out the type of firewall is in use from the network administrator:

If the firewall is a proxy server, one option is use port mapping.

If it is a SOCKS (Socket Secure) Server then one option is to use SOCKScap  application wrapping.
Both options are described below.