Client Log

Client Log (ClockWatch Server)
ClockWatch Server records all client requests to time-synchronization in the Client Log. The Client Log reports on all users (clients) accessing the ClockWatch Server, reporting the IP address, number of accesses and the last time each of the clients accessed the ClockWatch server. Totals are also shown since the ClockWatch Server was last started. The Client Log file is available in the main ClockWatch program directory, under the name ClientLog.txt.

Sample Client Log:

Client Access Log for beagleNT
Report Run 12/23/98 4:05:31 PM

Client IP Times Last
Number Address Contacted Contact

1 190.30.20.2 2 12/23/98 3:18:50 PM
2 190.30.20.4 3 12/23/98 3:56:11 PM
3 190.30.20.5 1 12/23/98 3:06:07 PM

3 <-TOTALS-> 6 12/23/98 3:56:11 PM

Event Log (CW Server, CW Client 2000)

This section explains how to interpret the ClockWatch event log. The entries in this log are controlled by the Event log options set in the Options->Logging section. Companion entries are also written to the NT event log, if enabled.
A sample of the Log is included below:

Event Log 2/13/2001 10:23:49 AM

Date Time Type Action

----- ---- ---- -----

01-02-13 10:23:49 Info Start time setting with time-a.nist.gov

01-02-13 10:23:49 Info Setting done - Time difference too small.

01-02-13 10:25:02 Info Start time setting with time-a.nist.gov

01-02-13 10:25:02 Info Setting done - Time difference too small.

01-03-15 16:12:00 Warning Unable to check clock for the last 3 hours

01-03-15 16:13:59 Info Start time setting with 192.168.2.239

01-03-16 11:28:42 Warning Connection with time server failed.

01-03-15 16:25:18 Warning Using next available server: time.nist.gov, with protocol: NIST

Date The date the of event (yy-mm-dd).

Time The local time of the event (hh:mm:ss).

Type Severity of the event: Info, Warning or Error.

Action Event detail.